Viking 5.5 Sports Fisherman MKII
  |  First Published: June 2009

Straight up, the Viking 5.5 is a very impressive boat, with striking lines and solid build. She felt very safe while crossing the bar and heading outside to put her through her paces. With a 2.3m beam and a 19 degree hull deadrise, she handled the conditions well and felt very reliable and responsive while carving through a slight chop and a good rolling swell.

Right away you could tell that this was a well built boat, designed for fishing and enjoying the open ocean.

Seafarers have been manufactured on the Gold Coast since 1957 and have been reputable, not to mention popular. In November 2007, The Haines Group took over the business and moved operations for the Seafarer range to Brisbane. Knowing they had purchased a sound product with good heritage they have made few changes to the make up of the Viking 5.5, recognising that they had a hull design that had excellent ride quality and ability to handle most situations. This new Viking has subtle differences that will improve its longevity and make it a more appealing purchase to the offshore fisherman.

Looking at the boat she looks very similar to the older models, with some subtle difference and one major hidden one. Basically the Haines group have applied their touch in the small finishes and slight changes to the construction method to improve the overall quality of the boat.

The internal structure of the boat is the biggest difference with internal timber work being all computer cut, ensuring a tighter fit and sturdier construction. The normal timber has been replaced by a multi layered ply called ‘Rubly’, each layer of the ply has been treated before bonding resulting in a very tough and durable product that is warranted against impregnation from pests or rot.

To round off their build improvements they use a woven fibreglass mat which adds to the strength of the light weight hull, which apparently helps reduce fuel consumption and increases hull performance.

Other quality add-ons in the stainless steel fitting and instrumentation have brought this tried and tested boat to modern and future standards.

On the water the Viking 5.5 was very stable at rest both at sea and in the river, making her a great fishing boat. The gunwales weren’t too low on your legs and reaching the water to wash your hands wasn’t impossible. So when landing a big fish you’ll be confident in staying on board and bringing in the catch.

With plenty of storage a day on the water can be easily enjoyed, large side pockets on both and shelves in the cabin provide plenty of space for those items that need quick and easy access, like life jackets, the offshore safety kit, sunscreen and other essential odds and ends. With plenty of storage bins under seats in the cabin to store so much stuff you could spend a week at sea if you wanted to.

With a wide clear deck she has plenty of space for a couple of large coolers for the food and drink supplies as well as the all important catch. The stern of the boat has two large bait tanks on either side and will hold plenty of bait, the test boat was still to be fitted with a bench seat and back rest at the stern to add extra comfort for passengers.

Underway, she feels very comfortable and safe to drive, visibility is good as you look forward and aft and the skipper’s seat is comfortable and well positioned with good foot rails for both the skipper and passenger. Handrails are easy to access and add extra support when conditions are a little rough.

The controls are well positioned and all the instrument dials are easy to read. The radio was easy to access and when fitted the Humminbird 778CX fish finder, the skipper’s position will be well appointed. Easy access to the anchor well through the cabin makes anchoring easy and safe, the stainless steel bow rails add extra safety and add to the striking appearance of the boat.

Powered by the Suzuki DF140, the Viking hand plenty of power and didn’t feel undergunned at all. When tested, she was running a 19” prop but Rob from Camden Haven Marine recommends a 21” Prop and said ‘This boat will roll out the door with a 21” prop’. This should drop the top ends revs and give her a tad more speed. With the 19” prop, though, she pulled out of the water beautifully at around 3200rpm and would cruise easily at this speed, which by the gauges was around 25-28kt.

When given a little throttle and trimmed right out she hit the rev limiter at just over 6000rpm, but when scaled back a little she belted along at around 43-45kt. But a comfortable cruising speed in between was found at around 4200rpm which was about 35kt and good speed in the river.

It was very reassuring to know she had a good deal of grunt for any tricky or hair-raising bar crossing. With a 130 litre fuel tank you’ll have enough fuel to get you to and from some of those far off fishing hot spots.

When travelling the hull design and construction proved to be everything Seafarer make it out to be, comfortable, smooth and quiet. When put through its paces in some swell and chop, she handled admirably. Holding her course and staying true. The hydraulic steering makes a huge difference and adds to reassurance of a sound boat for offshore action.

To complete this package the Seafarer Viking 5.5 is matched with a Telwater Desert Edge trailer, with multi rollers for ease of delivery to the water and retrieval. Overall the boat, motor and trailer come in a towing weight of 1350kg, so you’ll need a medium to large 4WD to tow this rig. Length of the rig including the motor is 6.85m with a height of 2.2m and a width of 2.3m. Making this a great fibreglass boat for the trailer fisherman, who likes comfort, safety and reliability.

The test boat fitted with all the extras will set you back $64,990 or to tailor make your own packages start at $47,900 with a 90hp Suzuki. Just drop in and speak to Rob Sewell at Camden Haven Marine and he’ll put you in the right direction to get you on the water in your own Seafarer Viking 5.5 and fill you in on all the standard features and inclusions.



Centre-Line Length: 5.5m

Maximum Beam: 2.3m

Weight: 850KG Approx.

Dead-Rise: 19º

Maximum Power: 150HP

Max Engine Weight:195KG

Transom Height: 25”

Load Capacity: Six Adults

Length Overall on Trailer Including Engine: 6.85m

Overall Height on Trailer: 2.2m

Width On Trailer: 2.3m

Test Boat Package

Seafarer Viking 5.5m

Suzuki DF 140 – Fitted with a 21” Prop

Stainless Steel Rocket Launchers/Targa with Bimini

Cabin Light

Side Clears and Curtains

Alloy multi-roller Desert Edge trailer

Stainless Steel bow rails

Rear Lounge and Backrest (to be fitted)

Clip in Carpet

Navman VHF Radio and Ariel

Dual Battery System

Humminbird 778CX Fishfinder (to be fitted)

Two tone Hull

Hydraulic Steering

Reads: 4482

Matched Content ... powered by Google

Latest Articles

Fishing Monthly Magazines On Instagram

Digital Editions

Read Digital Editions

Current Magazine - Editorial Content

Western Australia Fishing Monthly
Victoria Fishing Monthly
Queensland Fishing Monthly